Hi Robert, You need a "router port" (eg. ES20+, SIP/SPA) to do that kind of thing, not a "switch port" (eg. 65xx, 67xx).
I always liken the switch linecards to be about the same as shoving a c3750 (or perhaps 4500) as a card into the 6500/7600 chassis. There is a definite limitation to the amount of complex L3 things you can do with them. regards, Tony. >________________________________ > From: Robert Williams <[email protected]> >To: 'Adam Vitkovsky' <[email protected]>; "[email protected]" ><[email protected]> >Sent: Monday, 25 March 2013 7:05 PM >Subject: Re: [c-nsp] Processing one VLAN received on a Q-in-Q port > >Hi Adam, > >Many thanks for that, it reads like it would do exactly what we need, however >the switch doesn't accept Ethernet encapsulation: > >(config-if)#service instance 10 ethernet >(config-if-srv)#ethernet ? > lmi Configure ether lmi parameters >(config-if-srv)#? >Ethernet EFP configuration commands: > default Set a command to its defaults > ethernet Configure ether lmi parameters > exit Exit from ETHER EFP configuration mode > no Negate a command or set its defaults > >It's running Version 12.2(33)SXJ3 / AdvIP Services and the line card is a >6708-10GE with a DFC3CXL > >Any other pointers or maybe suggestions as to IOS versions / Line cards with >or without this feature? > >Cheers! > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
