I'm trying to remember everything from last year, some of it depends on wireless power, AP placement, Speed in which the user is walking, what objects might interfere etc.
I think they also talk about some specific setting that you want to set on the wireless to force faster roaming. Wish I could find that PP. Scott On Thu, Mar 28, 2013 at 12:16 PM, Zach Hill <[email protected]> wrote: > I'll do another coverage analyses though just to be sure and crank the > access-points down a bit. > > > On Thu, Mar 28, 2013 at 2:51 PM, Zach Hill <[email protected]> wrote: > >> Sorry, I said -65dB but meant -55dB in looking at the graphing I did just >> the other week. >> >> Thanks, >> >> -Zach >> >> >> On Thu, Mar 28, 2013 at 2:49 PM, Zach Hill <[email protected]> wrote: >> >>> Sorry but this isn't a wireless coverage issue. Doing wireless mapping >>> it nver drops below -65dB walking throughout the entire building. Laptops >>> and various other wirless network devices poll often enough to switch >>> between the access points as to never lose full bars. The Cisco IP Phones >>> are the only devices with issues. >>> >>> Based on my findings the IP Phones do not try and switch to the >>> nearest/strongest access-point often enough. >>> >>> >>> On Thu, Mar 28, 2013 at 2:40 PM, Scott Voll <[email protected]>wrote: >>> >>>> This is not a phone issue, but a Wireless network design issue. >>>> >>>> What are you using for wireless? >>>> >>>> What does your coverage look like? >>>> >>>> There needs to be a very good overlap in order to have good voice >>>> coverage. >>>> >>>> There was a great wireless class at cisco live about voice design on >>>> your wireless network. >>>> >>>> Scott >>>> >>>> >>>> On Thu, Mar 28, 2013 at 10:09 AM, Zach Hill <[email protected]>wrote: >>>> >>>>> Does anyone know if there is a way to make a IP Phone update it's >>>>> access-point more often? We're having an issue where traveling between >>>>> two >>>>> access points while on a call doesn't seem to poll for the strongest >>>>> wireless signal often enough. The symptoms include bi-directional voice >>>>> issues due to the low signal strength. >>>>> >>>>> It seems the phones attempt to stay with the access-point they were on >>>>> when >>>>> the call was made until it cannot reach it at all even at huge signal >>>>> loss. >>>>> >>>>> Thanks, >>>>> >>>>> -Zach >>>>> _______________________________________________ >>>>> cisco-nsp mailing list [email protected] >>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>>>> >>>> >>>> >>> >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
