Are you counting on summarization to limit your feed, or are you restricting the announcements themselves? Without your actual config it's hard to guess what is going on here...
-Blake On Tue, Apr 9, 2013 at 3:13 PM, Ahmed Hilmy <[email protected]> wrote: > Dear Friends, > > Recently i have faced a strange issue, BGP session with my UP Links goes > down due this log at UP Link side: > --------------------------------------------------- > > RP/0/RSP0/CPU0:Apr 8 13:10:54.818 : bgp[1044]: %ROUTING-BGP-4-MAXPFXEXCEED > : No. of IPv4 Unicast prefixes received from x.x.x.x: 401 exceed limit 400 > > RP/0/RSP0/CPU0:Apr 8 13:10:54.818 : bgp[1044]: %ROUTING-BGP-5-ADJCHANGE : > neighbor x.x.x.x Down - Peer exceeding maximum prefix limit (CEASE > notification sent - maximum n umber of prefixes reached) (VRF: > default) > > > ------------------------------------------------------------- > > # sh bgp neighbor x.x.x.x detail | i Prefix advertised > > Prefix advertised 2735, suppressed 0, withdrawn 1855, maximum limit > 524288 > #sh bgp neighbor x.x.x.x advertised-routes > > i count the number of advertised prefixes are only 215 > > So what Prefix advertised 2735 does it mean ? > Why i faced this issue with my UP Links , it happened sometime , if i have > configured BGP filter in wrong way so i have to face this > issue continuously. > > Any suggest plan to check ? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
