We have a BGP session with a carrier delivered on ME3600-A. Because ME3600 is not able to carry bgp table we have create vlan 100 and we and made the gigabit port access to vlan 100.
7609 <---------- ME3600-B <--------- ME3600-A <------- BGP SESSION ME3600-A vlan 100 name BGP_PEERING interface GigabitEthernet0/1 description BGP_PEERING switchport access vlan 100 ME3600-A and ME3600-B are interconnected with a trunk port. ME3600-B vlan 100 name BGP_PEERING ME3600-B and 7609 are also interconnected with a trunk port CISCO 7609-S vlan 100 name BGP_PEERING interface Vlan100 description BGP_PEERING ip address XXX.XXX.XXX.XXX 255.255.255.248 In all trunk ports we are using mpls enabled SVIs. So the vlan 100 travels all the way from ME3600-A to 7609 and the bgp session is running on 7609. I am trying to say is it possible to replace the vlan with EoMPLS and how? Best Regards Antonis. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
