Hi,
We have 2 x 7200's running as LNS's terminating DSL tails - The DSL
tails(sessions) are load-balanced across both 7200's by our upstream carrier.
The 7200's have HSRP running on the "LAN" side, so that our clients connect to
the virtual ip
The client "LAN" interfaces are in VRF's (As are the auth'd DSL tails) - We
need the 7200's to exchange routing information for these VRF's (So run MP-BGP
on the link between the 7200's), but if we do this, the LAN(HSRP) Interfaces in
a given VRF would be in the same subnet, so I assume we would see a routing
conflict?
We unfortunately cant test this as the system is live...we can organise an
outage window, but Im hoping someone has a similar setup, or can offer some
advice on the best way to set this up?
Thanks.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
