I have IPv4/ MPLS Backbone, i want to deploy IPv6 by using exist Backbone. Yes, dual stack at PE only which it is facing to CE, but PE will face my core as IPv4. Please let me know if it is not clear yet ?
Regards, Ahmed On Mon, Apr 15, 2013 at 8:00 PM, Harold 'Buz' Dale <[email protected]> wrote: > Are you planning on providing native v6 via dual stack at the edges and > then using 6PE to traverse your core? Maybe I am a little slow but it isn't > clear to me exactly what you are trying to do. > Thanks, > Buz > > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Ahmed Hilmy > Sent: Sunday, April 14, 2013 15:56 > To: [email protected] > Subject: [c-nsp] IPv6 Transition - IP/MPLS Backbone > > Hello Expert, > > We are planning to deploy IPv6 at our IPv4 Backbone, our PE to as Dual > Stack and carry IPv6 packet through MPLS label. > There are different scenarios, one of them is 6PE. > Would you please guide me from where can i start ? > > Thanks, > > Ahmed > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
