Thanks a lot for the kind share BR, Mohammad
> From: [email protected] > To: [email protected]; [email protected] > CC: [email protected] > Subject: RE: [c-nsp] VPLS IOS IOS-XR > Date: Tue, 16 Apr 2013 09:35:15 -0500 > > Trying to hide configs, I probably shouldn't have change this in my previous > email regarding me3600 ios... > router bgp 123 > should be... > router bgp 64512 > > Aaron > > -----Original Message----- > From: Aaron [mailto:[email protected]] > Sent: Tuesday, April 16, 2013 9:33 AM > To: 'Mohammad Khalil'; 'Blake Dunlap' > Cc: '[email protected]' > Subject: RE: [c-nsp] VPLS IOS IOS-XR > > This is for VPLS w/BGP AD w/LDP Sig.... ME3600 and ASR9006... > > Aaron > > -------------- IOS (ME3600 I don't recall if it was 15.2 or 15.3) > > interface GigabitEthernet0/2 > switchport trunk allowed vlan none > switchport mode trunk > service instance 1 ethernet > encapsulation (whatever you wanna do) > bridge-domain 100 > > interface Vlan100 > no ip address > xconnect vfi vpls1 > > l2 vfi vpls1 autodiscovery > vpn id 100 > > router bgp 123 > bgp router-id 1.1.1.1 > bgp log-neighbor-changes > no bgp default ipv4-unicast > neighbor 1.1.1.2 remote-as 64512 > neighbor 1.1.1.2 update-source Loopback0 > > address-family l2vpn vpls > neighbor 1.1.1.2 activate > neighbor 1.1.1.2 prefix-length-size 2 > > ***** I recall that the l2 vfi has some automatic route target > imports/exports and some automatic rd behavior, perhaps taken from the bgp > AS number and VPN ID... > ***** I think I found that without this in IOS "neighbor 1.1.1.2 > prefix-length-size 2" you have issues with bgp session towards ios xr box... > > RP/0/RSP0/CPU0:9k#sh bgp l2 vpls neighbors 1.1.1.1 | be mal Mon Jan 7 > 15:54:00.672 CST Total malformed UPDATE 1206 > Last malformed UPDATE 00:00:03 > Error subcode 10, attribute code 0, action reset session > Malformed UPDATE: 88 bytes > FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF > (much more hex code here, intentionally removed) > > -------------- IOS XR (ASR9006 4.1.2) > > interface GigabitEthernet0/0/0/10.1 l2transport encapsulation (whatever you > want) > > l2vpn > bridge group gr1 > bridge-domain bd1 > interface GigabitEthernet0/0/0/10.1 > ! > vfi vf1 > vpn-id 100 > autodiscovery bgp > rd auto > route-target 64512:100 > signaling-protocol ldp > > router bgp 64512 > bgp router-id 1.1.1.2 > address-family l2vpn vpls-vpws > ! > neighbor 1.1.1.1 > remote-as 64512 > update-source Loopback0 > address-family l2vpn vpls-vpws > > > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Mohammad Khalil > Sent: Tuesday, April 16, 2013 1:44 AM > To: Blake Dunlap > Cc: [email protected] > Subject: Re: [c-nsp] VPLS IOS IOS-XR > > Can you please share your experience ? > > Thanks > > From: [email protected] > Date: Mon, 15 Apr 2013 19:37:25 -0500 > Subject: Re: [c-nsp] VPLS IOS IOS-XR > To: [email protected] > CC: [email protected] > > Yes. > > -Blake > > > On Mon, Apr 15, 2013 at 7:04 PM, Mohammad Khalil <[email protected]> > wrote: > > > Hi > > > > Have anyone tried VPLS between IOS and IOS-XR? > > > > Thanks > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
