Subnet masks and wildcard masks are not the same. Subnet masks always have all ones in the network bits and all zeroes in the host bits. Wildcard masks use bit masking differently, and for different reasons. On Apr 18, 2013 10:32 PM, "sky vader" <[email protected]> wrote:
> Hello, > > when using the following mask errors out as bad mask when used on an > interface. > > labasa(config-if)# ip address 10.0.10.100 255.0.255.255 > ERROR: Bad mask 255.0.255.255 for address 10.0.1.100 > > > works on an access-list, > > labasa(config-if)#access-list 101 extended permit ip any 10.0.10.150 > 255.0.255.255 > > Just wondering what am I missing? > > > sky > ______________________________**_________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
