Correct, but then how come when I use network-object group such as the
following, netmask of 255.0.255.255 works?
labasa# show run object-group id test
object-group network test
network-object 10.0.10.100 255.0.255.255
sky
On 04/18/2013 10:37 PM, Bradford Chatterjee wrote:
Subnet masks and wildcard masks are not the same. Subnet masks always have
all ones in the network bits and all zeroes in the host bits. Wildcard
masks use bit masking differently, and for different reasons.
On Apr 18, 2013 10:32 PM, "sky vader" <[email protected]> wrote:
Hello,
when using the following mask errors out as bad mask when used on an
interface.
labasa(config-if)# ip address 10.0.10.100 255.0.255.255
ERROR: Bad mask 255.0.255.255 for address 10.0.1.100
works on an access-list,
labasa(config-if)#access-list 101 extended permit ip any 10.0.10.150
255.0.255.255
Just wondering what am I missing?
sky
______________________________**_________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp>
archive at
http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
