Had a call with cisco tac and they managed to get it working by removing the RD.
No idea why this resolved it. Now to try and get it to working with a juniper PE. Nick -- Nick Ryce Fluency Communications Ltd. e. [email protected] w. http://fluency.net.uk/ t. 0845 874 7000 On 16/04/2013 13:37, "Nick Ryce" <[email protected]> wrote: >Hi, > >I have 2 x ME3600x running me360x-universalk9-mz.153-2.S and am looking >to use the new VPLS BGP signalling functionality. > >I am using RSVP with the topology attached but I cannot get traffic to >pass. Any ideas? > > >Configs as below. > >Any help with debug commands would also be greatly appreciated. > >hostname PE1 >! >! >! >no aaa new-model >ip routing >! >! >! >! >ip name-server 8.8.8.8 >! >! >mpls traffic-eng tunnels >l2vpn vfi context lab > vpn id 512 > autodiscovery bgp signaling bgp > ve id 1 > ve range 11 > rd 172.16.1.1:512 > route-target export 56595:512 > route-target import 56595:512 >! >vlan 512 > name lab >! >l2 router-id 172.16.1.1 >! >! >! >interface Loopback0 > ip address 172.16.1.1 255.255.255.255 > ip ospf 1 area 0.0.0.0 >! >interface Tunnel0 > description PE1-to-PE2 > ip unnumbered Loopback0 > tunnel mode mpls traffic-eng > tunnel destination 172.16.2.2 > tunnel mpls traffic-eng priority 1 1 > tunnel mpls traffic-eng path-option 1 dynamic >! >interface Tunnel1 > description PE1-toPE3 > ip unnumbered Loopback0 > tunnel mode mpls traffic-eng > tunnel destination 172.16.3.3 > tunnel mpls traffic-eng priority 1 1 > tunnel mpls traffic-eng path-option 1 dynamic >! >interface GigabitEthernet0/1 > no switchport > ip address 10.0.0.1 255.255.255.252 > mpls traffic-eng tunnels > ip rsvp bandwidth percent 100 >! >interface GigabitEthernet0/2 > switchport access vlan 512 >! >router ospf 1 > router-id 172.16.1.1 > network 10.0.0.0 0.0.0.3 area 0.0.0.0 > mpls traffic-eng router-id Loopback0 > mpls traffic-eng area 0.0.0.0 >! >router bgp 56595 > bgp log-neighbor-changes > bgp graceful-restart restart-time 120 > bgp graceful-restart stalepath-time 360 > bgp graceful-restart > no bgp default ipv4-unicast > neighbor 172.16.2.2 remote-as 56595 > neighbor 172.16.2.2 update-source Loopback0 > neighbor 172.16.3.3 remote-as 56595 > neighbor 172.16.3.3 update-source Loopback0 > ! > address-family ipv4 > neighbor 172.16.2.2 activate > neighbor 172.16.2.2 send-community extended > neighbor 172.16.3.3 activate > neighbor 172.16.3.3 send-community extended > exit-address-family > ! > address-family vpnv4 > neighbor 172.16.2.2 activate > neighbor 172.16.2.2 send-community extended > neighbor 172.16.3.3 activate > neighbor 172.16.3.3 send-community extended > exit-address-family > ! > address-family l2vpn vpls > neighbor 172.16.2.2 activate > neighbor 172.16.2.2 send-community extended > neighbor 172.16.2.2 prefix-length-size 2 > neighbor 172.16.2.2 suppress-signaling-protocol ldp > neighbor 172.16.3.3 activate > neighbor 172.16.3.3 send-community extended > neighbor 172.16.3.3 suppress-signaling-protocol ldp > exit-address-family > > >hostname PE3 >! >! >! >no aaa new-model >ip routing >! >! >! >! >ip name-server 8.8.8.8 >ipv6 multicast rpf use-bgp >! >! >mpls traffic-eng tunnels >l2vpn vfi context lab > vpn id 512 > autodiscovery bgp signaling bgp > ve id 3 > ve range 11 > rd 172.16.3.3:512 > route-target export 56595:512 > route-target import 56595:512 >vlan 512 > name test >! >! >! >! >interface Loopback0 > ip address 172.16.3.3 255.255.255.255 > ip ospf 1 area 0.0.0.0 >! >interface Tunnel0 > description PE3-to-PE2 > ip unnumbered Loopback0 > tunnel mode mpls traffic-eng > tunnel destination 172.16.2.2 > tunnel mpls traffic-eng priority 1 1 > tunnel mpls traffic-eng path-option 1 dynamic >! >interface Tunnel1 > description PE3-to-PE1 > ip unnumbered Loopback0 > tunnel mode mpls traffic-eng > tunnel destination 172.16.1.1 > tunnel mpls traffic-eng priority 1 1 > tunnel mpls traffic-eng path-option 1 dynamic >! >interface GigabitEthernet0 > ip address 46.226.1.178 255.255.255.248 > speed auto > duplex auto > negotiation auto >! >interface GigabitEthernet0/1 > no switchport > ip address 10.0.0.6 255.255.255.252 > mpls traffic-eng tunnels > ip rsvp bandwidth percent 100 >! >interface GigabitEthernet0/2 > switchport access vlan 512 >! >interface Vlan512 > no ip address > member vfi lab >! >router ospf 1 > router-id 172.16.3.3 > network 10.0.0.4 0.0.0.3 area 0.0.0.0 > mpls traffic-eng router-id Loopback0 > mpls traffic-eng area 0.0.0.0 >! >router bgp 56595 > bgp log-neighbor-changes > bgp graceful-restart restart-time 120 > bgp graceful-restart stalepath-time 360 > bgp graceful-restart > no bgp default ipv4-unicast > neighbor 172.16.1.1 remote-as 56595 > neighbor 172.16.1.1 update-source Loopback0 > neighbor 172.16.2.2 remote-as 56595 > neighbor 172.16.2.2 update-source Loopback0 > ! > address-family ipv4 > neighbor 172.16.1.1 activate > neighbor 172.16.1.1 send-community extended > neighbor 172.16.2.2 activate > neighbor 172.16.2.2 send-community extended > exit-address-family > ! > address-family vpnv4 > neighbor 172.16.1.1 activate > neighbor 172.16.1.1 send-community extended > neighbor 172.16.2.2 activate > neighbor 172.16.2.2 send-community extended > exit-address-family > ! > address-family l2vpn vpls > neighbor 172.16.1.1 activate > neighbor 172.16.1.1 send-community extended > neighbor 172.16.1.1 suppress-signaling-protocol ldp > neighbor 172.16.2.2 activate > neighbor 172.16.2.2 send-community extended > neighbor 172.16.2.2 prefix-length-size 2 > neighbor 172.16.2.2 suppress-signaling-protocol ldp > exit-address-family > > >Tunnels are up in both directions. > >Output of some commands as below > >PE3#show l2vpn vfi name lab >Legend: RT=Route-target, S=Split-horizon, Y=Yes, N=No > >VFI name: lab, state: up, type: multipoint, signaling: BGP > VPN ID: 512, VE-ID: 3, VE-SIZE: 11 > RD: 172.16.3.3:512, RT: 56595:512, 56595:512 > Bridge-Domain 512 attachment circuits: > Vlan512 > Pseudo-port interface: pseudowire100001 > Interface Peer Address VE-ID Local Label Remote Label S > >PE1#show l2vpn vfi name lab >Legend: RT=Route-target, S=Split-horizon, Y=Yes, N=No > >VFI name: lab, state: down, type: multipoint, signaling: BGP > VPN ID: 512, VE-ID: 1, VE-SIZE: 11 > RD: 172.16.1.1:512, RT: 56595:512, 56595:512 > Bridge-Domain 512 attachment circuits: > Vlan512 > Pseudo-port interface: pseudowire100003 > Interface Peer Address VE-ID Local Label Remote Label S > >PE3#show bgp l2vpn vpls all >BGP table version is 28, local router ID is 172.16.3.3 >Status codes: s suppressed, d damped, h history, * valid, > best, i - >internal, > r RIB-failure, S Stale, m multipath, b backup-path, f >RT-Filter, > x best-external, a additional-path, c RIB-compressed, >Origin codes: i - IGP, e - EGP, ? - incomplete >RPKI validation codes: V valid, I invalid, N Not found > > Network Next Hop Metric LocPrf Weight Path >Route Distinguisher: 172.16.1.1:512 > *>i 172.16.1.1:512:VEID-1:Blk-1/136 > 172.16.1.1 0 100 0 ? >Route Distinguisher: 172.16.2.2:512 > *>i 172.16.2.2:512:VEID-2:Blk-1/136 > 172.16.2.2 100 0 i > *>i 172.16.2.2:512:VEID-2:Blk-1/136 > 172.16.2.2 100 0 i >Route Distinguisher: 172.16.3.3:512 > *> 172.16.3.3:512:VEID-3:Blk-1/136 > 0.0.0.0 32768 ? > > >PE1# show bgp l2vpn vpls all >BGP table version is 39, local router ID is 172.16.1.1 >Status codes: s suppressed, d damped, h history, * valid, > best, i - >internal, > r RIB-failure, S Stale, m multipath, b backup-path, f >RT-Filter, > x best-external, a additional-path, c RIB-compressed, >Origin codes: i - IGP, e - EGP, ? - incomplete >RPKI validation codes: V valid, I invalid, N Not found > > Network Next Hop Metric LocPrf Weight Path >Route Distinguisher: 172.16.1.1:512 > *> 172.16.1.1:512:VEID-1:Blk-1/136 > 0.0.0.0 32768 ? >Route Distinguisher: 172.16.2.2:512 > *>i 172.16.2.2:512:VEID-2:Blk-1/136 > 172.16.2.2 100 0 i > *>i 172.16.2.2:512:VEID-2:Blk-1/136 > 172.16.2.2 100 0 i >Route Distinguisher: 172.16.3.3:512 > *>i 172.16.3.3:512:VEID-3:Blk-1/136 > 172.16.3.3 0 100 0 ? > > >Nick > >-- >Nick Ryce > >Fluency Communications Ltd. >e. [email protected]<mailto:[email protected]> >w. http://fluency.net.uk/ >t. 0845 874 7000 >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
