Colleagues, I have enabled "mls qos" on some C3560X switches and configured "mls qos trust cos" on the trunk ports. Nothing more.
In Wireshark I can see that some packets generated by the switches themselves have some non-default CoS values. E.g. OSPF hello packets and PIM messages have the cos value of 6 in the 802.1Q header, STP frames have the value of 7 etc etc. Why does this happen and where is it documented? I have read somewhere that IOS marks IP routing traffic to DSCP CS6. Is there some mapping between DSCP and CoS bits enabled by default? However, there can be no question of DSCP in STP frames. Where can I read what else is marked by default and how? Thanks in advance for any input. -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:[email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
