All,
Anyone familiar with this module, WS-X6324-100FX-MM? Currently, it resides in
an older 6509 Catalyst with an older COS platform. The old 6509 is using a SUP1
engine. Is this blade compatible with the newer model 6509E? I am using a 720
sup engine, and an IOS platform. I initiated a query on Cisco.com, to no avail.
Any input?
~Jay Murphy
IP Network Specialist
NM State Government
IT Services Division
PSB - IP Network Management Center
Santa Fé, New México 87505
"We move the information that moves your world."
"Good engineering demands that we understand what we're doing and why, keep an
open mind, and learn from experience."
"Engineering is about finding the sweet spot between what's solvable and what
isn't."
Radia Perlman
P Please consider the environment before printing e-mail
Confidentiality Notice: This e-mail, including all attachments is for the sole
use of the intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited unless specifically provided under the New Mexico Inspection of
Public Records Act. If you are not the intended recipient, please contact the
sender and destroy all copies of this message. -- This email has been scanned
by the Sybari - Antigen Email System.
<<image001.jpg>>
<<image002.png>>
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
