Team,
Our VSL is consist of 2 Interfaces (Te1/5/4, 1/2/8) with VSLP (G1/9/7) as
follows.
VSS_BB#show vslp lmp neighbors
Instance #1:
LMP neighbors
Peer Group info: # Groups: 1 (* => Preferred PG
PG # MAC Switch Ctrl Interface Interfaces
---------------------------------------------------------------
*1 6c50.4daf.ba00 2 Te1/5/4 Te1/5/4, Te1/2/8
If we disconnect one control interface(Te1/5/4) of VSL, we think any
problem doesn’t occur but traffic loss is occurred for 30sec.
(When we disconnect one interface (Te1/2/8) of VSL, any problem didn’t
occur.)
I have no idea this is expected behavior or not ?
Thanks for any input in advance
===============================
Sungmin Cho 설명: cid:[email protected]설명:
cid:[email protected]
Datacenter Specialist / CCIE #13564
Network Engineering Team
( :+82-2-3443-8077, 2 : +82-2-3443-7794
: :+82-10-9978-5063 / +962-79-974-3856
===============================
<<image001.jpg>>
<<image002.jpg>>
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
