At that stage, neighbors agree on Master/Slave relationship before moving to "exchange" DBD's. This traffic is unicast between neighbors.
On Mon, May 6, 2013 at 11:30 AM, "Rolf Hanßen" <[email protected]> wrote: > Hello, > > I used no authentication for testing, but thanks for the hint, need to put > that on the checklist before implementing. ;) > > kind regards > Rolf > > >> If I apply the policy-map after OSPF changes to FULL, it stays in that > >> status. > >> If I apply the map and clear OSPF process it flaps the whole time > >> between > >> EXSTART and DOWN: > > > > Are you using OSPFv3 authentication? In this case the first protocol in > > the packets is AH, and the next is OSPF. This doesn't fully explain what > > you're seeing, but is something to check. > > > > I have no clue for the other strangenesses you describe. > > > > Regards, > > Bergonz > > > > > > -- > > Ing. Michele Bergonzoni - Laboratori Guglielmo Marconi S.p.a. > > Phone:+39-051-6781926 e-mail: [email protected] > > alt.advanced.networks.design.configure.operate > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
