I would deploy 4.3.1 now if you had not started 4.3.0 yet Jared Mauch
On May 16, 2013, at 5:44 AM, Xu Hu <[email protected]> wrote: > Thanks for your information, you mean that 4.2.3 cannot support HSRPv2? We > must upgrade to 4.3.0? > > > 2013/5/16 Kordogiannis Themistoklis <[email protected]> > >> There are quite a few for 4.2.3 depending on how safe you want to be. We >> are running 4.2.3 with recommended patches and its stable. We had an issue >> with hsrp, tac said v2 with 4.3.0(we'll be testing that in the next few >> days) major note : Cisco says Max 1000 sessions per system, but we still >> need clarifications on that! >> >> Sent from my iPhone >> >> On 16 Μαϊ 2013, at 0:06, "Xu Hu" <[email protected]> wrote: >> >>> Hi Folks, >>> >>> Currently I am considering which SMU need to be installed in the >> production >>> environment, when i download the 4.2.3 software, i found the packet >>> included some 4.2.0 SMUs, not sure whether these are the mandatory ones >> or >>> optional? >>> >>> Also, any idea about the HSRPv2 support for ASR9K? >>> >>> Appreciate any response. >>> >>> Regards, >>> Hu Xu >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
