Hi, "Aggregate policing works independently on each DFC-equipped switching module and independently on the PFC2, which supports any non-DFC-equipped switching modules. Aggregate policing does not combine flow statistics from different DFC-equipped switching modules. You can display aggregate policing statistics for each DFC-equipped switching module, PFC2, and any non-DFC-equipped switching modules that are supported by the PFC2 by entering the show mls qos aggregate policer command." http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp1041087
On Tue, May 21, 2013 at 11:24 PM, Peter Rathlev <[email protected]> wrote: > On Tue, 2013-05-21 at 14:40 +0100, Phil Mayers wrote: >> On 21/05/13 14:18, Peter Rathlev wrote: >> > Aggregate (or "named") policers are shared among all ports on which you >> > apply them. >> >> ...on the same forwarding engine (PFC or DFC) IIRC? > > Err... yeah, that part was left as an exercise for the reader. ;-) > > -- > Peter > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
