At 01:08 PM 6/3/2013 Monday, Phil Mayers clamored:
How can I accomplish the equivalent of the "boundary" on NX-OS 5.2 for N7k, given it lacks the command? Does one just use a normal ACL, and if so, are there any caveats to doing so e.g. does "boundary" do *other* things that a plain ACL would miss?
In n7k, you must use a combination of control plane & data plane filtering to get the equivalent functionality of multicast boundary.
For data plane, it's nothing more than ip access-group with matches on multicast traffic.
For control plane, there is independent filtering control for each protocol, ie, PIM, IGMP, MSDP, etc.
Hope that helps, Tim Tim Stevenson, [email protected] Routing & Switching CCIE #5561 Distinguished Technical Marketing Engineer, Cisco Nexus 7000 Cisco - http://www.cisco.com IP Phone: 408-526-6759 ******************************************************** The contents of this message may be *Cisco Confidential* and are intended for the specified recipients only. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
