Yes the circuit in question is SDSL. Is there any other special requirements? The ISP does support 4-wire mode but I don't understand should I create one or two pvc's and how to combine them via multilink or virtual-template. I tried both and I always get 2304 speed instead of 4608
On Tuesday, June 4, 2013, Tony wrote: > It requires the other end (exchange end) to be plugged into an equivalent > type card on the dslam that can combine the 4-wires into a single service. > > Can you even do ADSL on 4-wire ? I know SHDSL can be done over 4-wire. > > > regards, > Tony. > > ------------------------------ > *From:* Pavel Dimow <[email protected] <javascript:_e({}, 'cvml', > '[email protected]');>> > *To:* "[email protected] <javascript:_e({}, 'cvml', > '[email protected]');>" <[email protected]<javascript:_e({}, > 'cvml', '[email protected]');>> > > *Sent:* Tuesday, 4 June 2013 5:46 AM > *Subject:* [c-nsp] Combine two 2-wire DSL > > Hi, > > is it possible to combine two 2-wire DSL's into one 4-wire DSL using Cisco > 4-wire DSL card on 1841? > _______________________________________________ > cisco-nsp mailing list [email protected] <javascript:_e({}, > 'cvml', '[email protected]');> > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
