Hello everybody,
Some interesting problem I ran into recently – MQC not supported in output direction on Sup-2T & WS-X6908-10G? Let consider following simple configuration: class-map AF1X match ip dscp af11 af12 af13 class-map AF2X match ip dscp af21 af22 af23 policy-map TEST class AF1X class AF2X interface po1 service-policy output TEST MQC features are not supported in output direction for this interface As far as I know, the following combination – 6513E + Sup-2T + WS-X6908-10G – does support MQC. I tried this configuration on 2 different boxes (same hardware, different s/w) – same error. Any ideas will be appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
