I don't believe there is a version of 12.2SR for the 7200's that supports both DHCPv6-PD static route insertion AND IPv6 PBR.
Frank -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Mark Tinka Sent: Saturday, June 08, 2013 5:27 AM To: Gert Doering Cc: [email protected] Subject: Re: [c-nsp] 7204VXR reboots On Friday, June 07, 2013 10:30:38 PM Gert Doering wrote: > Yeah, true. But my experience with 12.2SR on 7200s has > not been very good overall,... What kinds of problems did you have? I've been running it since 2010 (which was the only/best way to harmonize code between the NPE-G2/7201 and other NPE's for the 7200 platform), and apart from various bugs that were very prevalent in SRC, it's been rock solid for me. I never did run SRD - when it made sense to upgrade, I went from SRC to SRE, as SRE introduced 32-bit ASN support on the platform. > and given that there is > 15.0M, I have always questioned what use it is to have > support for *one* software platform in a special-case > IOS train, maintained by the BU inside Cisco that caused > the most annoyance of all of them (having a polite day > today). 12.2SR is also coded for the 7600. So it's the 7200 and 7600 that this code is maintained for. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
