Thank you, Aaron. But span/rspan is not a solution for us. Because it does not separate internet/IX traffic. On a worstation we need some tools to do it. Also where is so much traffic to send it via rspan.
Samar 2013/6/12 Aaron <[email protected]> > Perhaps span/rspan if you just wanna mirror the traffic off to another port > and look it it. > > Aaron > > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Samar Chokutaev > Sent: Tuesday, June 11, 2013 3:33 PM > To: [email protected] > Subject: [c-nsp] Layer 2 Traffic Monitoring > > Hello, everyone > > Could you please help me in trouble with traffic monitoring. > We have IX-network with a pair ME3400 with only Layer 2 enabled. All > providers connected to this switches communicate directly with each other > (we use route servers). > Now we need traffic monitoring for IX network. But the problem is that some > of these providers buy Internet connection from the same link. That's why > we > need to separate internet traffic from the local. > > Is there any solution for this problem, except the usage of Netflow? > > Thank you in advance. > > Kind regards, > Samar > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > -- ================= Best regards, Samar Chokutaev Network Engineer CCNA, CCNP ================= _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
