Hi allI have the below topologyR1 - R2 - R3 - R4I have configured L2TPv3 between R2 and R3 in order to achieve connectivity between R1 and R4 which are enabled for both IPv4 and IPv6 R1#sh run int s1/0
Building configuration... Current configuration : 352 bytes ! interface Serial1/0 ip address 192.1.14.1 255.255.255.0 encapsulation frame-relay ipv6 address 2001:192:14::1/64 ipv6 rip RIPng enable serial restart-delay 0 frame-relay map ipv6 2001:192:14::4 101 broadcast frame-relay map ipv6 FE80::C804:13FF:FEA2:0 101 broadcast frame-relay map ip 192.1.14.4 101 broadcast frame-relay lmi-type ansi end R2#sh run int s1/0 Building configuration... Current configuration : 69 bytes ! interface Serial1/0 no ip address encapsulation frame-relay end R2#sh run | sec connect connect FR Serial1/0 202 l2transport xconnect 3.3.3.3 14 pw-class CLASS R2#sh run | sec pse pseudowire-class CLASS encapsulation l2tpv3 interworking ip ip local interface Loopback0 R3#sh run int s1/0 Building configuration... Current configuration : 69 bytes ! interface Serial1/0 no ip address encapsulation frame-relay end R3#sh run | sec connect connect FR Serial1/0 303 l2transport xconnect 2.2.2.2 14 pw-class CLASS ! R3#sh run | sec pse pseudowire-class CLASS encapsulation l2tpv3 interworking ip ip local interface Loopback0 R4#sh run int s1/0 Building configuration... Current configuration : 352 bytes ! interface Serial1/0 ip address 192.1.14.4 255.255.255.0 encapsulation frame-relay ipv6 address 2001:192:14::4/64 ipv6 rip RIPng enable serial restart-delay 0 frame-relay map ipv6 2001:192:14::1 404 broadcast frame-relay map ipv6 FE80::C801:13FF:FE92:0 404 broadcast frame-relay map ip 192.1.14.1 404 broadcast frame-relay lmi-type ansi end Now the connectivity for IPv4 is there and working fine , but the issue is in IPv6 , am i missing something? Thanks BR, _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
