Colin-
Thx for the feedback. I'm looking at the the F2 cards on nx-7k; are you
doing this on the older M-series cards? Also are you also doing
specifically BiDir PIM? Standard PIM (SM specifically for use-case in
question here) seems to work but without some minor hiccups on the newer
F2 cards. Thx again.
:-)
--
Regards,
Ge Moua
Univ of Minn Alumnus
--
On 06/19/2013 04:35 PM, Colin Whittaker wrote:
It works pretty well on n7k.
The multicast code is prone to a class of bugs on the 7k where the fibs
on the line cards get out of sync with the rib/mrib on the sup.
We had multiple instances of routers blackholing traffic after topology
changes because linecards had missing routes.
reloading the line card would fix it but it was always a bugger to find
the affected cards.
colin
On Wed, Jun 19, 2013 at 12:04:25PM -0500, Ge Moua wrote:
c-nsp folks:
Anyone out there looking to do PIM BiDir on Nexus? There appears to be
some limitations with PIM BiDir on the nx-7k but the nx-6k may be a
viable option (albeit the hw arch between the nx-7k& nx-6k are not
exactly apples-for-apples). I'd appreciate opinion/feedback from others
here. Thanks in advance.
--
Regards,
Ge Moua
Univ of Minn Alumnus
--
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
