Just verified on XR 4.2.3 router eigrp 123 vrf test address-family ipv6 (config-eigrp-vrf-af)#? autonomous-system Set the autonomous system of VRF clear Clear the uncommitted configuration commit Commit the configuration changes to running default-metric Set metric of redistributed routes describe Describe a command without taking real actions distance Set distance for EIGRP routes do Run an exec command exit Exit from this submode interface EIGRP interface configuration submode log-neighbor-changes Enable/Disable EIGRP neighbor logging log-neighbor-warnings Enable/Disable EIGRP neighbor warnings maximum-paths Maximum paths maximum-prefix Maximum number of IP prefixes acceptable in aggregate metric Modify EIGRP routing metrics and parameters neighbor Neighbor prefix limits configuration no Negate a command or set its defaults nsf Address family specific NSF related configuration pwd Commands used to reach current submode redistribute Redistribute another protocol root Exit to the global configuration mode route-policy Configure inbound/outbound policies router-id Set router ID show Show contents of configuration stub EIGRP stub timers Configure EIGRP timers variance Control load balancing variance
adam -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of M K Sent: Friday, June 28, 2013 5:06 PM To: [email protected] Subject: [c-nsp] EIGRP as IPV6 PE-CE Still ipv6 vrf is not implemented on IOS (Someone wrote, Cisco already did on IOS-XR line) ? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
