Hello, Is there a way or simple solution to terminate a bunch of "plain" L2TPv3 pseudowires to a BVI, to have a sort of VPLS? (VPLS/MPLS is not an option in my setup).
My deal is to have a distributed L2 architecture (I have a protocol that works only on L2), and it must traverse a non-ethernet IP based network. (traffic is quite low - max 1 mbps) It can easily done with a simple linux box, terminating l2tpv3 tunnels to a bridge interface, but I would like to do that on a cisco device. A very dirty solution can be to have a set of sub-interfaces (with xconnect) and a cable to another interface on the same router, having sub-interfaces terminated on a BVI. Something like that: GigaEthernet 0/0 is cabled to GigaEthernet 0/1 interface Giga 0/0.1301 encap dot1q 1301 xconnect 10.10.13.1 1301 pw-class pw1301 interface gig 0/0.1302 encap dot1q 1302 xconnect 10.10.13.2 1302 pw-class pw1302 interface gig 0/1.1301 encap dot1q 1301 bridge-group 1 interface gig 0/1.1302 encap dot1q 1302 bridge-group 1 bridge 1 protocol ieee bridge 1 route ip interface BVI 1 ip address 192.168.1.254 255.255.255.0 Is there a simpler way to accomplish that? thanks in advance, stefano -- Stefano Sasso http://stefano.dscnet.org/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
