Port-chanel MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit
Please use port-channel load-balance src-dest-IP command at global config. Hope after this implementation both links will be equally load balance. best regards Asim From: Ahmed Hilmy Sent: 18/07/2013 01:39 To: [email protected] Subject: [c-nsp] Same static-route to different destination / Port-chanel Hello Friends, Can i configure a static route for prefix x.x.x.x/y to different destinations a.a.a.a & b.b.b.b ? Router 1 -------- Router 2 directly connected. I want to do this thing because i have port-chanel between R1 - R1 with two interfaces, one of them is carrying 990 Mb but 2nd one is only carrying 60 Mb. Config is identical on bundle members. Please advice. Regards, Ahmed _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
