This is done per default, on Cisco gear, in 3600s intervals. You can do it manually aswell: #mpls traffic-eng reoptimize ? Tunnel Tunnel interface <cr> #
Fredrik On 22 July 2013 15:48, Mattias Gyllenvarg <[email protected]> wrote: > Though I have no actual experience > > I asked the same question at cisco live. And yes, it is supposed to > reevaluate at certain intervals. > > . > > Best regards > Mattias Gyllenvarg > On Jul 22, 2013 12:15 PM, "PlaWanSai RMUTT CPE IX" <[email protected]> > wrote: > > > Hi all, > > > > Do you have command for auto reoptimize Traffic > Engineering > > by the router? When option 10 down and then up it can reoptimize by > itself > > to option 10. > > > > > > > > Thank you very much > > > > > > > > Mr. Nattawat Kaewmanee > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
