On 12/08/13 15:14, Andriy Bilous wrote:
I suspect you would need to sync config-registers on both. In some circumstances when SP fails to boot, chassis would program 'halt on boot' on RP to prevent infinite reset cycling (most electrical failures happen on reset).
Erm... Just to re-iterate the date here:
On Tue, Jan 26, 2010 at 10:19 AM, Phil Mayers <[email protected]
...I originally reported this over 3 years ago, so TBH replying to me now is not helpful ;o)
Anyway, in *our* case, config-register was not implicated - a power cycle made it come up fine, and both RP and SP confreg were ok.
I am fairly convinced it is (was?) some esoteric "never halt" bug in the RP IOS code.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
