Are you sure you are monitoring the correct interface? Snmp oid possibly changed since interface added?
Sent from a mobile device On 08/09/2013, at 20:51, hamid tavoli <[email protected]> wrote: > in monitoring software such as prtg , solarwinds , ... (snmp based software > ) , for one shutdown interface with follow config , report infact and very > very high traffic in software. > this interface is up ,line protocol is down. > pls hlp me to resolve this problem in my noc system. > > my Router is CISCO 7609 > Ios :c78600rsp72043-adventerprisek9-mz,151-2.s_1 > > int ser 9/0/0.1/1/3/2:4 > ip unnumbered Loopback1 > encapsulation ppp > ! > > this interface bandwidth is 128K but traffic monitored is interrupted and > range of 500MB !!!!!!! > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
