Hi all , I have the below topologyR1 - R2 - R4R1 - R3 - R4The first path
operates in AS 12 and the second path operates in AS 13Now , I advertised
Loopback 0 on R4 (4.4.4.4/32) in both AS numbers , what I can see in R1 IP
routing table is only one path and in the topology table I can see two entries
but the second one which is the not selcted one shows FD inacesible , I shut
down the interface and I could learn the prefix via the second one , activated
again and as it preempted , what is the reason behind selesting the first path
? all the links are similar
Thanks
BR,Mohammad
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
