Hi folks, I'm building some 6500s with 2T sups running advanced enterprise 15.01(1)SY1 and am having some difficulty figuring out how to configure and assign dscp values to the ingress tail drop thresholds on X6816-10T-2T interfaces using c3pl.
Assigning dscp values to and configuring WRED queue thresholds is straightforward. e.g.: class c-map-af41-af42-af43 bandwidth remaining percent 10 random-detect dscp-based random-detect dscp af41 percent 80 100 random-detect dscp af42 percent 70 100 random-detect dscp af43 percent 60 100 However I can't figure out the equivalent for tail drop only thresholds, and haven't found anything on Google etc. I can fall back to the old mls qos commands but would prefer to use the new c3pl if possible. Has anyone run into this before? Thanks, Chris [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
