configuration is applied per port group on each linecard. however -- each interface (and subsequent 'show' commands) have an enable/disable knob so that mapping can occur on some (but not all) interfaces.
q. -= sent via iphone. please excuse spelling, grammar, and brevity =- On Sep 11, 2013, at 11:02, harbor235 <[email protected]> wrote: > I am trying to understand the VLAN mapping feature specifically on the > 7600. I read a bit but would like confirmation on how it works once > implemented. > > > When the feature is enabled it effects all ports on the linecard port ASIC, > so it is linecard dependent. > > My Question: > > 1) Do all ports have to be engaged in VLAN mapping in the port ASIC group > once > enabled? or only trunk ports perform the actual VLAN mapping, access > ports would > not and the configuration for vlan mapping is hidden/disabled? > > 2) In a port ASIC group can I perform VLAN mapping from/to unique VLANS or > am i confined to the same vlans per port ASIC group? > > > > Mike > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
