I am trying to setup , IPoE scenario with several kinds of auth ( mac/option82 ) . With the docs from https://supportforums.cisco.com/docs/DOC-19702 and have come up with the following config:

##########################################################################

hostname ASR9001
radius source-interface Loopback0 vrf default
radius-server host ddd.ddd.ddd.46 auth-port 1812 acct-port 1813
!
aaa server radius dynamic-author
 port 3799
 client xxx.xxx.xxx.102 vrf default
 !
 client xxxxxxxx.46 vrf default
 !
!

aaa attribute format MY_AUTH_MAC_OP82
 mac-address plus circuit-id separator #
!
aaa attribute format MY_AUTH_MAC
 mac-address
!
!
aaa radius attribute nas-port-id format NAS_PORT_FORMAT
!
!
aaa accounting subscriber default group radius
aaa authorization subscriber default group radius
aaa authentication subscriber default group radius
aaa accounting update periodic 10

dhcp ipv4
 profile IP_DEFAULT proxy
  helper-address vrf default xxx.xxx.xxx.102 giaddr yyy.yyy.236.1
  relay information option
  relay information policy keep
  relay information option allow-untrusted
 !

 interface Bundle-Ether100.361 proxy profile IP_DEFAULT
!
interface Bundle-Ether100.361
 ipv4 point-to-point
 ipv4 unnumbered Loopback100
 service-policy type control subscriber IP_PM
 encapsulation dot1q 361
 ipsubscriber ipv4 l2-connected
  initiator dhcp
 !
!
interface Loopback0
 ipv4 address yyy.yyy.yyy.174 255.255.255.255
!
interface Loopback100
 ipv4 address yyy.yyy.236.1 255.255.255.0
!
!
dynamic-template
 type ipsubscriber IPSUB_TPL
  ipv4 unnumbered Loopback100
 !
!
!
class-map type control subscriber match-any DHCP
 match protocol dhcpv4
 end-class-map
!
policy-map type control subscriber IP_PM
 event session-start match-all
  class type control subscriber DHCP do-until-failure
   5 activate dynamic-template IPSUB_TPL
   10 authorize aaa list default format MY_AUTH_MAC password key
  !
 !
 end-policy-map
!
####################################################################################################################################

subscriber session looks like this

RP/0/RSP0/CPU0:ASR9001#sh subscriber session all detail
Fri Sep 13 12:37:06.697 EET
Interface:                None
Circuit ID:               000401690107
Remote ID:                0006001ebd7b2f00
Type:                     IP: DHCP-trigger
IPv4 State:               Up Pending, Fri Sep 13 12:37:04 2013
Mac Address:              000c.42a8.71e2
Account-Session Id:       000023ac
Nas-Port:                 Unknown
User name:                unknown
Outer VLAN ID:            361
Subscriber Label:         0x0000006b
Created:                  Fri Sep 13 12:37:04 2013
State:                    Connecting
Authentication:           unauthenticated
Access-interface:         Bundle-Ether100.361
Policy Executed:
policy-map type control subscriber IP_PM
  event Session-Start match-all [at Fri Sep 13 12:37:04 2013]
    class type control subscriber DHCP do-until-failure [Succeeded]
      5 activate dynamic-template IPSUB_TPL [Succeeded]
Session Accounting: disabled
Last COA request received: unavailable
Pending Callbacks:
  Waiting for Authorization to complete
  Waiting for Authentication response from AAA


####################################################################################################################################################

and the dhcp info

RP/0/RSP0/CPU0:ASR9001#sh dhcp ipv4 proxy binding detail
Fri Sep 13 12:37:40.594 EET
MAC Address:                 000c.42a8.71e2
VRF:                         default
Server VRF:                  -
IP Address:                  0.0.0.0
Giaddr from client:          0.0.0.0
Giaddr to server:            0.0.0.0
Server IP Address:           0.0.0.0
Server IP Address to client: 0.0.0.0
ReceivedCircuit ID:          0x00-04-01-69-01-07
InsertedCircuit ID:          0x00-04-01-69-01-07
ReceivedRemote ID:           0x00-06-00-1e-bd-7b-2f-00
InsertedRemote ID:           0x00-06-00-1e-bd-7b-2f-00
ReceivedVSISO:               -
InsertedVSISO:               -
Auth. on received relay info:FALSE
Profile:                     IP_DEFAULT
State:                       INIT
Proxy lease:                 60 secs (00:01:00)
Proxy lease remaining:       53 secs (00:00:53)
Client ID:                   0x01-0x00-0x0C-0x42-0xA8-0x71-0xE2
Access Interface:            Bundle-Ether100.361
Access VRF:                  default
VLAN Id:                     361
Subscriber Label:            0x0
*

* Next renew request from this client will be NAK'd in order to recreate subscriber session

RP/0/RSP0/CPU0:ASR9001#sh dhcp ipv4 proxy binding
Fri Sep 13 12:37:58.290 EET

Lease
MAC Address IP Address State Remaining Interface VRF Sublabel -------------- -------------- --------- --------- ------------------- --------- ---------- 000c.42a8.71e2 0.0.0.0 INIT 57 BE100.361 default 0x0




any ideas ?
without the  service-policy type control subscriber IP_PM , dhcp works fine.



_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to