Thanks for the clarification BR, From: [email protected] To: [email protected]; [email protected] Subject: RE: [c-nsp] VRF Export-map Date: Sun, 22 Sep 2013 15:11:08 +0100
The counters of a route-map only go up if it's being used to policy route. Which you are not doing. Thanks Darren http://www.mellowd.co.uk/ccie > From: [email protected] > To: [email protected] > Date: Sun, 22 Sep 2013 15:47:06 +0300 > Subject: [c-nsp] VRF Export-map > > Hi all I have established MPLS L3VPN and export-maps on both PEs Everything > is working good but my question is why the route-map is not counting?R2#sh > route-map route-map EXPORT_MAP, permit, sequence 10 Match clauses: ip > address prefix-lists: R4LOOP Set clauses: extended community > RT:2.2.2.2:4 Policy routing matches: 0 packets, 0 bytes > Thanks > BR, > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
