All, I have some SUP720's that keep hanging after the route processor is loaded. When I have been able to access the ROMMON on the RP they all are setup to be accessing the RP bootflash, not the SP bootflash or boot disk. While in ROMMON from the RP I am unable to access sup-bootflash:, sup-disk0:, sup-disk1:.
Is this a bad setup from someone previously trying to convert from CatOS to IOS? Why can't I access the SUP720 from the RP ROMMON? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
