MPLS TE support over SVI and Etherchannel is in the roadmap. Best Regards,
[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> [Think before you print.] Think before you print. This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: Pshem Kowalczyk <[email protected]<mailto:[email protected]>> Date: Wednesday, September 11, 2013 12:35 PM To: Eric Van Tol <[email protected]<mailto:[email protected]>> Cc: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] MPLS-TE on ME3600 Hi, We use ME3600x with MPLS TE. I can't comment on the first point (we don't have multiple areas), but on the second one - path protection is protection end-to-end, whilst FRR uses a local repair mechanism, so these two are quite different in the way they work. FRR on that device works fine and provides protection for both originated and transit LSPs. On the third point - yes, that's a limitation. I'm not sure if it's a hardware or a software one. kind regards Pshem On 12 September 2013 04:15, Eric Van Tol <[email protected]<mailto:[email protected]>> wrote: Hi all, I'm a bit confused about the documentation for the ME3600 with regard to its MPLS-TE support. Specifically, the 'MPLS TE' section (http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.3_3_S/configuration/guide/swmpls.html#wp1183331) states: The switch does not support these MPLS TE features: *Interarea TE support for OSPF and IS-IS *TE path protection On the first bulletpoint, does this simply mean that it cannot pass through areas without an explicit path set up? On the second bulletpoint, I'm confused about this because the next section in the documentation deals with Fast Reroute. Does this bulletpoint mean that the ME3600 cannot provide protection for transit LSPs? And finally, within the Fast Reroute section, I see this little nugget: "The switch supports MPLS TE fast reroute over only routed ports and not over SVIs or EtherChannels." Huh? Really? -evt _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
