Hi Waris, So on ME3800 I read the l2pt tunnel is not supported on EFPs with PW/xconnect configured on them, though IOS will let you enter the command with no complains. So to work around this I should be using l2pt forward instead right?
Is there actually a difference in function of these two commands please? adam -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Waris Sagheer (waris) Sent: Wednesday, October 02, 2013 6:29 PM To: Chris Russell; [email protected] Cc: Mostafa Mansour (mosmanso) Subject: Re: [c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ? Hi Mostafa, Can you help with ASR1K L2PT behavior? What is supported on ASR1K? Hi Chris, I am copying Mostafa (ASR 1K expert) to confirm the L2PT behavior on ASR1K. Just a side note from ME perspective, I would recommend using L2PT forward command rather than L2PT tunnel. Best Regards, [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> [Think before you print.] Think before you print. This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: Chris Russell <[email protected]<mailto:[email protected]>> Organization: ntech Date: Saturday, August 31, 2013 6:18 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ? On 21/08/2013 10:00, Chris Russell wrote: On 21/08/2013 09:54, Adam Vitkovsky wrote: And I assume no BPDUs are passed either. Is it possible to issue cmd: "l2protocol peer" or all the l2protocol commands are rejected altogether? Just to see if the L2protocol status changes somehow. As a final thread closing to this one, with thanks to various people, especially Adam, who responded - L2 tunnelling of control packets (BPDUs) is NOT supported on the ASR1K. Thanks Chris _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
