Default EVC MAC aging-time is 300s (5 minutes) while ARP timeout is 14400s (4 hours).
You may have to lower ARP timeout to 5 minutes also -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Chris Gibbs Sent: Wednesday, October 16, 2013 3:30 AM To: [email protected] Subject: [c-nsp] Dynamic ARP timeout on ASR 1001 Hey all, Having a bit of an issue with bridge-domains on ASR 1001 and dynamic ARP entries. Looking through the packet captures, I see the following events 1. DHCP request from CPE 2. DHCP ACK and assignment from DHCP server to CPE 3. Gratuitous ARP sent from CPE. 4. Packets flow as normal. 5. Something triggers dynamic ARP entry to timeout on the BNG (Cisco ASR 1001). a. Suspect this may be triggered by the DHCP Request renew or the following gratuitous ARP received. b. See the debug message on the ASR: *Oct 15 18:18:29.376: IP ARP: rcvd rep src 10.0.30.11 5475.d0df.7f48, dst 10.0.30.11 BDI100 *Oct 15 18:18:29.376: ARP DB: ARP entry of key 10.0.30.11 found *Oct 15 18:18:29.376: ARP TABLE: modifying entry 10.0.30.11/5475.d0df.7f48 on BD100 for Dynamic *Oct 15 18:18:29.376: ARP DYNAMIC[N]: Dynamic timeout occurredtimeout = 14400000, refresh_token = 2,refresh_timeout = 60000 *Oct 15 18:18:29.376: ARP DB: ARP entry of key 10.0.30.11 found 6. DHCP client on the CPE eventually sends through a DHCP request for the IP 10.0.30.11. 7. DHCP server replies with ACK. 8. Gratuitous ARP sent from CPE. 9. Dynamic ARP entry is populated. 10. Packets flow as normal. If I attempt to ping manually from the CPE, the dynamic arp entry is restored on the ASR. Further details: Platform: ASR 1001 Software: 3.10a (asr1001-universalk9.03.10.00a.S.153-3.S0a-ext.bin) Interfaces: interface Port-channel2 description Uplink - <redacted> mtu 2000 ip dhcp relay information option-insert ip dhcp relay information check-reply none no ip address no ip unreachables no negotiation auto lacp fast-switchover lacp max-bundle 1 service instance 1101 ethernet encapsulation dot1q 80 second-dot1q 1101 rewrite ingress tag pop 2 symmetric ip dhcp relay information option subscriber-id GCC-CPE-1-1 service-policy output pm_BNG-WAN-wVoice-Out-12Mbps bridge-domain 100 ! service instance 1102 ethernet encapsulation dot1q 80 second-dot1q 1102 rewrite ingress tag pop 2 symmetric ip dhcp relay information option subscriber-id GCC-CPE-2-1 service-policy output pm_BNG-WAN-wVoice-Out-25Mbps bridge-domain 100 interface BDI100 ip address 10.0.30.1 255.255.255.0 ip helper-address 2.2.1.2 GCC-BNG-1#sh run | i bridge bridge-domain 100 bridge-domain 912 bridge irb bridge-domain 100 bridge-domain 100 bridge 100 protocol vlan-bridge bridge 100 route ip Any ideas? Cheers, [X]<http://www.gosford.nsw.gov.au/> Chris Gibbs Network and Security Engineer | Information Management & Technology Gosford City Council www.gosford.nsw.gov.au<http://www.gosford.nsw.gov.au/> PO Box 21 Gosford NSW 2250 Phone: (02) 4325 8888 Mobile: 0408 222 496 Fax: (02) 4323 2477 [email protected]<mailto:[email protected]> The information contained in this email may be confidential. You should only disclose, re-transmit, copy, distribute, act in reliance on or commercialise the information if you are authorised to do so. Gosford City Council does not represent, warrant or guarantee that the communication is free of errors, virus or interference. Gosford City Council complies with the Privacy and Personal Information Protection Act (1998). See Council's Privacy Statement at http://www.gosford.nsw.gov.au/council/privacy.html _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ We believe 1 family torn apart by war is too many. Tell the world you do too: http://www.unhcr.org/1family?link=email _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
