Hi,
with local-pref you can control outgoing traffic for a specific
destination.
Prefer one of your upstreams based on the source of traffic, you have to
use policy-based routing.
Regards,
Alex
Am 16.10.2013 03:49, schrieb CiscoNSP List:
Thanks for everyone's responses - Would the following work (Prefer upstream B
egress for the subnet in question)?
route-map TEST permit 10
match ip address 100
set local-preference 200
neighbor UPSTREAM_B route-map TEST in
Cheers.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
