On 20/10/2013, at 10:39 PM, naresh reddy <[email protected]> wrote:
> is it possible to use macsec taffic for a non supported switch Yep, MacSec just looks like another protocol on top of Ethernet. I had it running in the lab between two 4500s with an EoMPLS VC between them. Keep MTU in mind. 4507R+E/Sup7E[ce1] --> 7606/Sup32[pe1] --MPLS--> 7606/Sup32[pe2] --> 4507R+E/Sup7E[ce2] interface GigabitEthernet1/1 description EoMPLS to ce2 no switchport ip address 10.2.2.1 255.255.255.252 no ip redirects no ip unreachables no ip proxy-arp ip ospf network point-to-point ip ospf dead-interval minimal hello-multiplier 5 ip ospf 1 area 0 cts manual no propagate sgt sap pmk 00000000000000000000000000000000000000000000000000000000DEADBEEF mode-list gcm-encrypt end _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
