>From the Cisco Live presentation BRKSPG-2209 - Designing Access Network With >the ME3600X and ME3800X
MEF CE 2.0 L2PT forward Options - 15.3(2)S 3600-HL-4(config-if-srv)#l2protocol forward ? R4 Reserved Protocol using DA Mac 0180.C200.0004 R5 Reserved Protocol using DA Mac 0180.C200.0005 R6 Reserved Protocol using DA Mac 0180.C200.0006 R8 Reserved Protocol using DA Mac 0180.C200.0008 R9 Reserved Protocol using DA Mac 0180.C200.0009 RA Reserved Protocol using DA Mac 0180.C200.000A RB Reserved Protocol using DA Mac 0180.C200.000B RC Reserved Protocol using DA Mac 0180.C200.000C RD Reserved Protocol using DA Mac 0180.C200.000D RF Reserved Protocol using DA Mac 0180.C200.000F cdp Cisco Discovery Protocol dtp Dynamic Trunking Protocol elmi ELMI Protocol esmc ESMC Protocol lacp LACP Protocol lldp Link Layer Discovery Protocol loam Link OAM Protocol pagp Port Aggregation Protocol ptppd PTP Peer Delay Protocol stp Spanning Tree Protocol udld UDLD Protocol vtp pagp Port Aggregation Protocol ptppd PTP Peer Delay Protocol stp Spanning Tree Protocol udld UDLD Protocol vtp Vlan Trunking Protocol -Steve -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Jason Lixfeld Sent: Tuesday, October 29, 2013 10:16 PM To: [email protected] NSP Subject: [c-nsp] ME3600X & A9K L2 Protocol Tunnelling support As far as what I can glean from various configuration guides and other bits of documentation: ME3600s don't support L2 protocol tunneling on cross-connect EVCs, but they do on port based xconnects or on EVCs where the sp-facing interfaces are trunks; they will forward, tunnel or peer various layer 2 protocols. Does that include STP variants (RSTP, PVST, R-PVST, MST, EAPS)? Pause and 802.1x appear to be a part of the MEF CE2.0 spec and it seems the ME3600 is compliant, so I'm presuming these will all work with a port based xconnect? IOS XR configuration docs that I've found seem to say the platform only supports L2 protocol tunnelling for STP, VTP and CDP. Is that it? That seems like a bit of a weak feature set if I'm using something like an A9K as a PE compared to an ME3600. I read a Cisco presentation from July 2013 that says the A9K is MEF CE2.0 compliant so it should support at least everything the ME3600 supports, but I'd expect to be able to find some sort of configuration guide telling me how to configure these L2PT bits. Can anyone point me to some docs? Thanks in advance. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
