I liked your email address. Very creative :) DFC bootflash is used for the crash files. In the event of a crash the file is written to it..
Do "show platform hardware capacity flashâ and check if you can see a bootflash on the linecard.. You may need to raise a TAC case if there is no bootflash.. Regards Abidin On 3 Nov 2013, at 21:27, P G <[email protected]> wrote: > What is DFC bootflash for? > > #dir dfc#3-bootflash:/ > > No files in directory > > > on the other card it just reports error when I try to show the DFC > bootflash and it's not reporting the size of DFC bootflash > > > When I tried to upgrade the rommon on the WS-X6704-10GE with DFC3BXL, one > card reported error because it does not have DFC bootflash while the other > one with DFC bootflash finished upgrading successfully. These 2 line cards > have different revision numbers. > > > But so far the card without DFC bootflash is functional. Does it need a RMA > at some point? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
