Thanks for the link and the replies guys! I see that to upgrade the internal module you need to CF adapter, I think this is where my reseller was confusing me as they didn't mention this.
I guess then I can just use the disk0 slot in the front of the sup720 and boot the image from this instead? As there are separate SP and RP boot flash internally, would I be right in assuming that I can use 2 CF cards and set the boot variable for the SP and RP to point to disk0 and disk1 external CF cards respectively? Alternatively would it be best to get the internal CF adapter and card long term? On Tue, Nov 19, 2013 at 2:43 PM, Sidney Boumendil < [email protected]> wrote: > > > > 2013/11/19 Adam Fitzgerald <[email protected]> > >> Hey guys, >> >> I am struggling to understand if I can upgrade the internal bootflash >> module on a WS-SUP720-3B, to 512mb (from 64mb). >> > > If I understand correctly what you are tryin to achieve, yes it possible > to: > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_17277.html > Keep in mind the ROMMON version requirements. > > HTH > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
