On (2013-11-19 15:45 -0800), Tony wrote: > Hi all, > > We've been having an issue recently where we have routes on PE routers that > look to be ok, but are not forwarding any traffic. Usually this can be > resolved by doing "clear ip route vrf <vrf_name> <ip_prefix>" which causes > the PE to re-learn the route and everything works again.
Could be number of reasons. You might want to confirm if 'sh mls cef vrf X lookup Y' and 'sh mls cef adjacency X' are ok next time it happens. If they are not ok, you can in interim use script to pull out CEF and MLS CEF periodically, compare and clear mismatches, I've done that few times. But if MLS CEF is ok, unfortunately it still does not prove it'll work. If MLS CEF looks ok too, you really would need to check from ELAM what the platform is doing with the frames which are not passed, it usually gives lot of information what is wrong. But like Pete said upgrade to latest SRE might be good call, it'll be supported at least until like mid 2015. -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
