Dear Experts, I am in the process to acquire and implement network infrastructure solution by upgrading the Firewall/UTM with a very high forwarding rate firewall at least 40Gbps, by using the following (TECHNICAL SPECIFICATION)
Data Center Firewalls/UTM 1. Frewall throughput minimum 40Gbps. 2. VPN throughput 17Gbps 3. Support up to 6 million concurrent sessions. 4. Support up to 2000 IPSec VPN peers. 5. At least 2x10GE SFP+ ports and 12x 10/100/1000 RJ45 6. Must support VPN clustering and load balancing 7. Support Active/Active and Active/Standby HA 8. Power supply redundancy. 9. Must support IPS 10. Integrated IPS throughput should not be less than 6Gbps 11. Firewall system must be able to provide stateful inspection capabilities 12. Firewall system must be able to support Network Address Translations (NAT) 13. Firewall system must be capable of supporting the following management methods: a. WebUI (HTTP and HTTPS) b. Command line interface (console) c. Command line interface (telnet) d. Command line interface (SSH) e. Centralized Management Solution. 14. Firewall system must be capable of preventing Denial of Service attacks. 15. Must Support Virtual domains / Security zones Min. 10/250 16. Must Support DLP 17. Must Support Web Filtering / Content Filtering 18. Anti (Virus, Spams, Malware, Spyware) 19. Logging management capability 20. Load balancing capability 21. System must support SNMP (v 1,2,3). 22. Internal storage Min. 60GB The above spec could apply to juniper, cisco, hp, xtreme ...etc, any recommendation should I add/adjust to my TECHNICAL SPECIFICATION. -mad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
