+1 on the EX 4200. Good, configurable with VC cables or optics for bundling in to a chassis over a larger physical area, decent horse power and decent features.
On Dec 9, 2013, at 11:19 AM, Doug McIntyre <[email protected]> wrote: > On Mon, Dec 09, 2013 at 05:17:58PM +0200, Mark Tinka wrote: >> On the Juniper side, the EX4200 and EX3200 might be all you >> need. You can get them pretty cheap on the used market now. > > Ditto on the Juniper EX. The EX4200 is current, and is even cheap on > gray market (ie. Amazon), although not quite as cheap as used. The > EX4200 in particular comes with the VC ports & VC stack cables already. > (as opposed to the EX4550 which you have to buy both, but > that is beyond what the OP is looking for). > > At used EX4200 pricing, I'd go for them over the EX2200, since there > are a lot more out there, more bang for the buck. > > The EX3200 is fine too, just be careful that you can only VC stack > the same family (ie. only all EX4xxx). > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
