Thanks you Bill for the information. Best Regards,
2013/12/26 Bill Blackford <[email protected]> > There may be better definitions, but in general: > > Sub-rate: forwarding handled in software > Line-rate: forwarding handled in hardware. > > > > > On Thu, Dec 26, 2013 at 11:26 AM, Darwin Santana < > [email protected]> wrote: > >> The goal is using the device for Internet Traffic with QoS enable. >> >> What's the difference between sub-rate and line-rate device ? >> >> >> 2013/12/26 Bill Blackford <[email protected]> >> >>> A few years back, I went with a pair of ASR1002's.s 1. My traffic was >>> 400Mbps and with that particular mix, had lots and lots of small packets. >>> Hence, microbursts were enough to make the single 7301 fall over on >>> occasion. 2. My traffic was trending on a 150% increase every two years. I >>> found it necessary to design for what I need in 3 - 4 years vs. "what I >>> need now". In my opinion, if you have that much traffic, don't invest in >>> sub-rate devices, go with line-rate. You might discover down the road that >>> your traffic may change, as mine did, or you may be compelled to enable >>> features you hadn't thought of at purchase time that yield performance >>> penalties. >>> >>> >>> On Thu, Dec 26, 2013 at 6:48 AM, Darwin Santana < >>> [email protected]> wrote: >>> >>>> Hi All, >>>> >>>> Can I handle a 400 Mbps or up the bandwidth on the Router 3925E? >>>> >>>> Best Regards, >>>> >>>> Darwin >>>> _______________________________________________ >>>> cisco-nsp mailing list [email protected] >>>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>>> >>> >>> >>> >>> -- >>> Bill Blackford >>> >>> Logged into reality and abusing my sudo privileges..... >>> >> >> > > > -- > Bill Blackford > > Logged into reality and abusing my sudo privileges..... > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
