https://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbcgvrp.pdf
> Date: Fri, 10 Jan 2014 12:37:45 +0200 > From: [email protected] > To: [email protected] > Subject: [c-nsp] GARP on Cisco equipment > > Hi, > > GARP stands for Generic Attribute Registration Protocol. GVRP(GARP > VLAN Registration Protocol) allows for the control of IEEE 802.1q > VLANs. As I understand GVRP provides dynamic creation and management > of VLANs, including pruning of unnecessary broadcasts and unicasts on > switches connected through 802.1q trunk ports. This sounds very > familiar to Cisco VTP. In addition, GARP standard specifies a GARP > Multicast Registration Protocol(GMRP), which allows bridges and > switches to register a multicast group membership. Latter sounds > similar to IGMP snooping. > Is GARP used/supported on Cisco equipment? If yes, has anyone used it > instead of Cisco alternatives? > > > regards, > Martin > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
