Hello Andrea, Looking at the config guides REP and ERP are the two options: http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/releas e/15.3_3_S/configuration/guide/swrep.html http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/releas e/15.3_3_S/configuration/guide/swering_prot.html
However the documentation to ERP configuration is broken. adam -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Pasquino Andrea Sent: Tuesday, January 21, 2014 6:12 PM To: [email protected] Subject: [c-nsp] ME3600X: VPLS Attachment Circuit Resiliency options Hello, We have three sites: in each site two Customer Switches are attached to two ME3600x PE. The service between the three sites must be Layer2, and we don't want to mix L2protocols between PEs and customer switches. I know there are some solutions for 7600 (relay BPDU through dedicated PW, MC-LAG, etc...). Are there solutions now or in roadmap for ME3600x/ME3800X ? Best Regards Andrea _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
