On Mon, 2014-02-03 at 09:44 +0100, Cydon Satyr wrote: > event manager applet profile_snmp_start [...] > When I do it from cli myself, it works. Whan I wait for EEM to do it, > it never does. I see it matches syslog event, but when I log in and > try "show profile terse", nothing is there.
Are you using TACACS+ with command authorization by any chance? I that case you need to configure "event manager session cli username <name>" or it will fail. (I'm not sure it actually does the authorization steps at all though.) None of the commands ask any questions that needs input? -- Peter _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/